The battery should also be protected from water

Appropriate configuration. led street light housing Manufacturers Followed by solar controller for high pole lights. The controller of the Yangzhou solar street lamp manufacturer plays a very important role in the high pole lamp.

However, many people insist on using other light sources, such as low-pressure sodium lamps and low-pressure fluorescent lamps. Of course, despite the use of LED light sources, the quality and service life of light sources at different prices are also different. The stability of controller functions at different prices is also different, and the service life is also different.

The most important thing about high pole lights is that they are affected by the above three factors. When purchasing light sources, controllers and batteries, you should tell us your needs, and Yangzhou solar street light manufacturer (www.. It is the core of solar energy and its main function is to store electrical energy. What factors will affect the service life of high pole lights? The first is the lighting source: the current high pole lights almost all use LED light sources, because LED light sources have low light decay, long service life, and high brightness.

It can effectively control the working state of the battery and indirectly protect the solar high pole lamp. A good controller must be accurate and stable.jschindo. Therefore, when choosing a solar battery, you should choose a battery with a relatively stable performance, and the construction should be tight, and the battery should also be protected from water.

If you want to use the high pole lamp for a longer time, you can also buy a better quality controller. A better quality LED street lamp can be used for more than 10 years, and a general LDE light source may be used for 35 years. will give you a comparison. 

Garden light manufacturers will give you a brief introduction to the three common types

Usually refer to outdoor road lighting fixtures below 6 meters.. Contemporary courtyard lamp: Its design style mostly uses contemporary popular art elements and simple techniques to present it. Its composition is sensitive and simple, and its colors are compared and contrasted.

It gives people the nobility of European palaces, and the design style is simple and popular or classical and romantic, or luxurious and luxurious, or exquisite and elegant. Classical courtyard lamp: Its design mostly uses Chinese classical ingredients, applied and modified. So, what types of garden lights can be divided into?

Today, garden light manufacturers will give you a brief introduction to the three common types. Simple rectangles, circles and cones, etc. It is also a kind of outdoor lighting fixtures, which is a kind of It has a special type and has high ornamental outdoor lighting fixtures., Led road lights suppliers are both elegant and generous, but also practical.

Contains this wonderful imagination, dating back to the ancient Roman period. European-style courtyard lamp: Its design style mostly uses some European-style artistic elements from European countries, and is presented in a general mode.

Garden lights, in short, are lighting fixtures used in the courtyard, which are a kind of outdoor lighting fixtures. It exposes a simple beauty, seeking freedom, unrestrainedness and atmosphere

Do not tie the plug of the lighting power supply to the motor

Handle well the requirements of various indicators such as illuminance, light color, color rendering, three-dimensional feeling, texture, flash, and glare limit. Note: Do not tie the plug of the lighting power supply to the motor, bottom plate, etc. is a manufacturer specializing in the production of solar street lights, high pole lights, garden lights, landscape lights, led street lights, more than 15 years of production experience, high quality, low prices, and integrity We welcome new and old customersLed light housing manufacturers to come to consult. Turn off the triple switch, unplug the motor and controller plugs, plug in the power plugs of the shunt sodium lamps, close the corresponding air circuit breakers, and close the sealed door.

Close the triple circuit breaker, click the button of the control box, check the pull-in of the relay, and turn on the motor switch when it is normal. During the ascent, pay close attention to abnormal conditions, such as the safety coupling slipping, abnormal sound of the motor, worm gear reducer, or other abnormal conditions, stop the ascent immediately, find the cause, and solve the problem. The material of the lamp is generally made of aluminum alloy plate and stainless steel with good corrosion resistance. The lamp panel is equipped with 6 sets of guide pulley sets and three or more sets of braking devices. In addition to meeting people's leisure and entertainment needs, it will also be an important landscape and a must for a civilized society.

The lamp panel rises: Open the sealed door at the bottom of the light pole and close each air circuit breaker. The design of the hook system is very reasonable. When the lamp panel rises to the position of the automatic hook, it needs to be moved up until the hanging ring on the lamp panel touches the hook on the light pole. In order to fully ensure that the lamp panel stops automatically when it reaches its position, reliable limit switches are installed for the rising and falling movements of the lamp panel, and over-travel protection is provided.com) 

Prevent the loss of coordination between people and the light environment. The guide wheels distributed at 120 degrees roll along the surface of the lamp pole during the raising or lowering process of the lamp panel to ensure that the lamp panel does not swing. Instructions for installation of high pole lights---lifting operation of lamp panel.Lamp panel: The material is Q235 hot-dip galvanized steel frame; the lighting range can reach 4000-6000M. The light-transmitting mirror of the lamp adopts tempered glass

Carefully count all components according to the loading and packing list

The signs on each section of the rod indicate the type, order number, and number of sections. Each splice provides a socket length, but due to manufacturing, installation errors and physical factors, there are variations in socket length, so the maximum Wholesale Die casting Led street lights manufacturer socket length and minimum socket length are provided.jschindo.

You can lubricate the inner and outer surfaces of the sleeve with soapy water. is a manufacturer specializing in the production of solar street lights, high pole lights, garden lights, landscape lights, led street lights, more than 15 years of production experience, high quality, low prices, honesty, and welcomes new and old customers Come to consult. Be careful not to use lubricating oil to prevent leakage and contamination of the rod body. High pole lamp installation process: The weight of the shaft is marked with a colored pen on the inside of the shaft.

Preparation before installation of high pole lights: Check whether the components are damaged, bent or twisted, and whether the zinc layer is damaged.With the popularization of new energy, solar street lighting products have been fully integrated into our daily lives, and the brightly lit environment of the city's commercial square attracts the passion of the aunts for dancing in the square. Next, the editor will briefly explain the preparation work and installation process before installing the high pole lamp . Check whether the delivery is correct and whether the crane lifting capacity is sufficient.In order to facilitate installation, it may be necessary to lubricate the mating surface.

Carefully count all components according to the loading and packing list. According to the maximum and minimum socket length provided on the drawing, mark on the rod body for socket connection. When socketing, apply necessary force at both ends to obtain a tight socket.

The performance of the charge controller has a great impact

The photovoltaic charge controller's own energy consumption and excellent charging control strategy directly affect the amount of electrical energy that the photovoltaic system itself can provide. Just south of the northern hemisphere is the most basic orientation of the solar cell array.

However, in the actual application of solar photovoltaic power generation, in order to obtain more power generation and the need for self-cleaning of battery modules, the fixed installation of the square array is usually inclined, which requires calculation of the solar radiation amount on the inclined surface ( Usually greater than the amount of radiation on the horizontal plane). The 'sun window' concept can show the sunshine time and path conditions of the venue.

Analysis and Evaluation of Power Station Operation Data On the basis of obtaining complete data, the following evaluation content should be analyzed and completed. Induction thunder is divided into thunder formed by electrostatic induction and thunder formed by electromagnetic induction. TheLed road lights factory design of local power grids needs to consider the construction of power supply points, the composition of the grid structure, and the matching and management of loads. However, the impact of local climate characteristics should be considered and careully evaluated. In buildings, industrialized PV panels can better reflect the character of the building.

Advantages and disadvantages of controlling the inverter integrated machine The advantages of the integrated control inverter are: photovoltaic charging and inverter combined, small size, less wiring, simple use, convenient maintenance, high cost performance, high efficiency of the whole machine, especially suitable for household systems. The shortcomings of the integrated inverter control are also obvious. One end of the photovoltaic charge controller is connected to the battery, and one end is connected to the solar cell array.

The performance of the charge controller has a great impact on the system The evaluation of the performance of photovoltaic charge controller can mainly be considered from three aspects: reliability, easy maintenance and charging efficiency. Site selection and site assessment of photovoltaic system The vent hole on the rubber plug must be kept unblocked. For key departments such as party and government agencies, military units, schools, banks, etc. Unauthorized connection and other phenomena are strictly prohibited, and high-power loads (such as electric furnaces, electric heating, central air conditioning, etc