Are there any requirements for the installation spacing of solar street lights?

The light source used is about 15 watts, and the distance between each solar street lamp is about 8 to 12 meters. From the distance between street lights, we can see that if solar street lights are installed on residential roads, we will find that their installation distance is significantly different from ordinary street lights. If both motor vehicle lanes and non-motor vehicle lanes need to be illuminated, single-sided or double-sided bidirectional lighting can be used. Solar street lights are mainly used for road lighting.

When installing solar street lights, if the installation distance is too large, there will be a black spot in the main lighting area. Generally speaking, when the road is less than 10 meters, it can be installed in a cross mode; when the road is more than 15 meters, it is recommended to use bilateral symmetrical lighting. Solar street lamps installed in road communities are generally about 3. The best distance of 60W split solar street light is 30-50 meters, and the best distance of 30W integrated solar street light is 30 meters.5 meters high.

So, are there any requirements for the installation spacing of solar street lights? What is the more reasonable installation spacing? Today, Manager Wang of the solar street light manufacturer will take everyone to discuss this question and find out the answer.The installation of solar street lights is different from the installation of general city circuit lights.

Special roads such as intersections, T-junctions, and corners can be illuminated according to actual conditions. When installing solar street lights, carefully install them on the side of the road that does not affect traffic to avoid collisions when pedestrians appear and cause safety accidents. led street light housing factory The spacing of solar street lights is determined by various factors such as their lighting power, height and road width. In addition, if the solar street lights are installed too close, the number of solar street lights will increase, causing lighting waste.

Generally, the following three lighting methods are used: single-sided lighting, crossover lighting on both sides, and symmetric lighting on both sides. This first depends on the width of the road and lighting needs. For some corners, one more solar street light should be installed to avoid blind spots in lighting

The natural conditions for installation are better

For example, for the same 6-meter LED street lights and 6-meter solar street lights, the price of solar street lights with low configuration may be less than 700 yuan, but the price of LED street lights with high-quality drivers and LED chips is higher than 700 yuan. Mainly depends on the style of the lamp housing used in the LED street lamp, the internal chip brand and the driving brand, and the price of different brands is different.

Therefore, it is generally not applicable to cities. The price of solar street lights is mainly determined by the power of solar panels, battery capacity, light poles and light source power. Solar street lights are generally used in new rural roads, while LED street lights can be applied to any road and are generally used in urban areas? Many people think that the price of solar street lights is more expensive than LED street lights, but in fact it is not necessarily so, let me explain it to you below.

The price of LED street lights depends on the poles, the LED chips and drivers in the light source..With the development of outdoor road lighting, solar street lights and LED street lights are used in many areas. However, solar street lights are maintenance-free, one-time investment, no electricity bills, and the benefits brought by them are much higher than LED street lights. The disadvantage is that general solar street lights are China 100W led street lights factory not full-power lights.

Compared with LED street lights, the brightness will be darker, and the natural conditions for installation are better, and there is no shade. Therefore, at the same wall thickness and height, the same light source power and LED chip, the price of solar street lights is generally higher than that of LED street lights, but only at the same height and same power, the price of solar street lights is not necessarily higher than that of LED street lights

If an LED upgrade is the right choice for you

THINGS TO CONSIDER IN DETERMINING LED UPGRADES
Because there are so many variables that need to be considered, making a quick and easy recommendation about transitioning to white LEDs is not possible. To get a jump start on the future, consider every lighting source in each room and establish what it's primary purpose is. Once you have done this, review the following items to help determine where on the priority purchase-list each replacement should be. Here are a few general guidelines to help you determine if an LED upgrade is the right choice for you:

1.) Is the lighting located in a home where the primary resident is older or has mobility issues? If the LED replacement produces adequate light levels, LED alternatives are perfect for use in homes where safety is a top priority. Knowing that an ill or older person will not need to change a burned-out light bulb again can provide peace-of-mind.

2.) Is initial cost a primary factor in determining if you are going to upgrade? The current nature of the white LED market means that prices are still relatively high, especially compared to traditional lighting. Being an early adopter means paying a premium; are you comfortable with knowing you could have paid less for the same technology if you had waited?

3.) Is the light located in bright daytime sunlight or an area of high heat? High levels of heat will noticeably shorten the lifespan of any LED, especially white LEDs. When considering LEDs, try to ensure that both the fixture and the location allow for adequate passive cooling to avoid color-shift and longevity issues. This is a much bigger concern when considering retrofit bulbs versus considering a "total package" LED fixture and lamp.

4.) Are you needing to reduce the heat output from a traditional light source? In bathrooms, laundry rooms and small spaces, conventional lighting can produce uncomfortable heat. LED lighting is great for these areas because they produce no heat and because affordably illuminating smaller Led light housing areas with LEDs presents much less of a challenge.