http://highpower.blog.shinobi.jp/ Die Casting Led Street Lamps Manufacturer, Road Lights Suppliers Thu, 13 May 2021 02:21:52 GMT ja © Ninja Tools Inc. led street light housing Manufacturers Followed by solar controller for high pole lights. The controller of the Yangzhou solar street lamp manufacturer plays a very important role in the high pole lamp.

However, many people insist on using other light sources, such as low-pressure sodium lamps and low-pressure fluorescent lamps. Of course, despite the use of LED light sources, the quality and service life of light sources at different prices are also different. The stability of controller functions at different prices is also different, and the service life is also different.

The most important thing about high pole lights is that they are affected by the above three factors. When purchasing light sources, controllers and batteries, you should tell us your needs, and Yangzhou solar street light manufacturer (www.. It is the core of solar energy and its main function is to store electrical energy. What factors will affect the service life of high pole lights? The first is the lighting source: the current high pole lights almost all use LED light sources, because LED light sources have low light decay, long service life, and high brightness.

It can effectively control the working state of the battery and indirectly protect the solar high pole lamp. A good controller must be accurate and stable.jschindo. Therefore, when choosing a solar battery, you should choose a battery with a relatively stable performance, and the construction should be tight, and the battery should also be protected from water.

If you want to use the high pole lamp for a longer time, you can also buy a better quality controller. A better quality LED street lamp can be used for more than 10 years, and a general LDE light source may be used for 35 years. will give you a comparison. ]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/the%20battery%20should%20also%20be Thu, 13 May 2021 02:21:52 GMT highpower.blog.shinobi.jp://entry/8
It gives people the nobility of European palaces, and the design style is simple and popular or classical and romantic, or luxurious and luxurious, or exquisite and elegant. Classical courtyard lamp: Its design mostly uses Chinese classical ingredients, applied and modified. So, what types of garden lights can be divided into?

Today, garden light manufacturers will give you a brief introduction to the three common types. Simple rectangles, circles and cones, etc. It is also a kind of outdoor lighting fixtures, which is a kind of It has a special type and has high ornamental outdoor lighting fixtures., Led road lights suppliers are both elegant and generous, but also practical.

Contains this wonderful imagination, dating back to the ancient Roman period. European-style courtyard lamp: Its design style mostly uses some European-style artistic elements from European countries, and is presented in a general mode.

Garden lights, in short, are lighting fixtures used in the courtyard, which are a kind of outdoor lighting fixtures. It exposes a simple beauty, seeking freedom, unrestrainedness and atmosphere]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/garden%20light%20manufacturers Mon, 26 Apr 2021 02:48:39 GMT highpower.blog.shinobi.jp://entry/7 Led light housing manufacturers to come to consult. Turn off the triple switch, unplug the motor and controller plugs, plug in the power plugs of the shunt sodium lamps, close the corresponding air circuit breakers, and close the sealed door.

Close the triple circuit breaker, click the button of the control box, check the pull-in of the relay, and turn on the motor switch when it is normal. During the ascent, pay close attention to abnormal conditions, such as the safety coupling slipping, abnormal sound of the motor, worm gear reducer, or other abnormal conditions, stop the ascent immediately, find the cause, and solve the problem. The material of the lamp is generally made of aluminum alloy plate and stainless steel with good corrosion resistance. The lamp panel is equipped with 6 sets of guide pulley sets and three or more sets of braking devices. In addition to meeting people's leisure and entertainment needs, it will also be an important landscape and a must for a civilized society.

The lamp panel rises: Open the sealed door at the bottom of the light pole and close each air circuit breaker. The design of the hook system is very reasonable. When the lamp panel rises to the position of the automatic hook, it needs to be moved up until the hanging ring on the lamp panel touches the hook on the light pole. In order to fully ensure that the lamp panel stops automatically when it reaches its position, reliable limit switches are installed for the rising and falling movements of the lamp panel, and over-travel protection is provided.com) 

Prevent the loss of coordination between people and the light environment. The guide wheels distributed at 120 degrees roll along the surface of the lamp pole during the raising or lowering process of the lamp panel to ensure that the lamp panel does not swing. Instructions for installation of high pole lights---lifting operation of lamp panel.Lamp panel: The material is Q235 hot-dip galvanized steel frame; the lighting range can reach 4000-6000M. The light-transmitting mirror of the lamp adopts tempered glass]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/do%20not%20tie%20the%20plug%20of%20the Tue, 13 Apr 2021 02:13:20 GMT highpower.blog.shinobi.jp://entry/6 Wholesale Die casting Led street lights manufacturer socket length and minimum socket length are provided.jschindo.

You can lubricate the inner and outer surfaces of the sleeve with soapy water. is a manufacturer specializing in the production of solar street lights, high pole lights, garden lights, landscape lights, led street lights, more than 15 years of production experience, high quality, low prices, honesty, and welcomes new and old customers Come to consult. Be careful not to use lubricating oil to prevent leakage and contamination of the rod body. High pole lamp installation process: The weight of the shaft is marked with a colored pen on the inside of the shaft.

Preparation before installation of high pole lights: Check whether the components are damaged, bent or twisted, and whether the zinc layer is damaged.With the popularization of new energy, solar street lighting products have been fully integrated into our daily lives, and the brightly lit environment of the city's commercial square attracts the passion of the aunts for dancing in the square. Next, the editor will briefly explain the preparation work and installation process before installing the high pole lamp . Check whether the delivery is correct and whether the crane lifting capacity is sufficient.In order to facilitate installation, it may be necessary to lubricate the mating surface.

Carefully count all components according to the loading and packing list. According to the maximum and minimum socket length provided on the drawing, mark on the rod body for socket connection. When socketing, apply necessary force at both ends to obtain a tight socket.]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/carefully%20count%20all%20compon Wed, 31 Mar 2021 01:20:51 GMT highpower.blog.shinobi.jp://entry/5
However, in the actual application of solar photovoltaic power generation, in order to obtain more power generation and the need for self-cleaning of battery modules, the fixed installation of the square array is usually inclined, which requires calculation of the solar radiation amount on the inclined surface ( Usually greater than the amount of radiation on the horizontal plane). The 'sun window' concept can show the sunshine time and path conditions of the venue.

Analysis and Evaluation of Power Station Operation Data On the basis of obtaining complete data, the following evaluation content should be analyzed and completed. Induction thunder is divided into thunder formed by electrostatic induction and thunder formed by electromagnetic induction. TheLed road lights factory design of local power grids needs to consider the construction of power supply points, the composition of the grid structure, and the matching and management of loads. However, the impact of local climate characteristics should be considered and careully evaluated. In buildings, industrialized PV panels can better reflect the character of the building.

Advantages and disadvantages of controlling the inverter integrated machine The advantages of the integrated control inverter are: photovoltaic charging and inverter combined, small size, less wiring, simple use, convenient maintenance, high cost performance, high efficiency of the whole machine, especially suitable for household systems. The shortcomings of the integrated inverter control are also obvious. One end of the photovoltaic charge controller is connected to the battery, and one end is connected to the solar cell array.

The performance of the charge controller has a great impact on the system The evaluation of the performance of photovoltaic charge controller can mainly be considered from three aspects: reliability, easy maintenance and charging efficiency. Site selection and site assessment of photovoltaic system The vent hole on the rubber plug must be kept unblocked. For key departments such as party and government agencies, military units, schools, banks, etc. Unauthorized connection and other phenomena are strictly prohibited, and high-power loads (such as electric furnaces, electric heating, central air conditioning, etc]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/the%20performance%20of%20the%20cha Wed, 17 Mar 2021 01:54:23 GMT highpower.blog.shinobi.jp://entry/4
When installing solar street lights, if the installation distance is too large, there will be a black spot in the main lighting area. Generally speaking, when the road is less than 10 meters, it can be installed in a cross mode; when the road is more than 15 meters, it is recommended to use bilateral symmetrical lighting. Solar street lamps installed in road communities are generally about 3. The best distance of 60W split solar street light is 30-50 meters, and the best distance of 30W integrated solar street light is 30 meters.5 meters high.

So, are there any requirements for the installation spacing of solar street lights? What is the more reasonable installation spacing? Today, Manager Wang of the solar street light manufacturer will take everyone to discuss this question and find out the answer.The installation of solar street lights is different from the installation of general city circuit lights.

Special roads such as intersections, T-junctions, and corners can be illuminated according to actual conditions. When installing solar street lights, carefully install them on the side of the road that does not affect traffic to avoid collisions when pedestrians appear and cause safety accidents. led street light housing factory The spacing of solar street lights is determined by various factors such as their lighting power, height and road width. In addition, if the solar street lights are installed too close, the number of solar street lights will increase, causing lighting waste.

Generally, the following three lighting methods are used: single-sided lighting, crossover lighting on both sides, and symmetric lighting on both sides. This first depends on the width of the road and lighting needs. For some corners, one more solar street light should be installed to avoid blind spots in lighting]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/are%20there%20any%20requirements Wed, 03 Mar 2021 01:17:49 GMT highpower.blog.shinobi.jp://entry/3
Therefore, it is generally not applicable to cities. The price of solar street lights is mainly determined by the power of solar panels, battery capacity, light poles and light source power. Solar street lights are generally used in new rural roads, while LED street lights can be applied to any road and are generally used in urban areas? Many people think that the price of solar street lights is more expensive than LED street lights, but in fact it is not necessarily so, let me explain it to you below.

The price of LED street lights depends on the poles, the LED chips and drivers in the light source..With the development of outdoor road lighting, solar street lights and LED street lights are used in many areas. However, solar street lights are maintenance-free, one-time investment, no electricity bills, and the benefits brought by them are much higher than LED street lights. The disadvantage is that general solar street lights are China 100W led street lights factory not full-power lights.

Compared with LED street lights, the brightness will be darker, and the natural conditions for installation are better, and there is no shade. Therefore, at the same wall thickness and height, the same light source power and LED chip, the price of solar street lights is generally higher than that of LED street lights, but only at the same height and same power, the price of solar street lights is not necessarily higher than that of LED street lights]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/the%20natural%20conditions%20for Wed, 24 Feb 2021 01:35:30 GMT highpower.blog.shinobi.jp://entry/2 Because there are so many variables that need to be considered, making a quick and easy recommendation about transitioning to white LEDs is not possible. To get a jump start on the future, consider every lighting source in each room and establish what it's primary purpose is. Once you have done this, review the following items to help determine where on the priority purchase-list each replacement should be. Here are a few general guidelines to help you determine if an LED upgrade is the right choice for you:

1.) Is the lighting located in a home where the primary resident is older or has mobility issues? If the LED replacement produces adequate light levels, LED alternatives are perfect for use in homes where safety is a top priority. Knowing that an ill or older person will not need to change a burned-out light bulb again can provide peace-of-mind.

2.) Is initial cost a primary factor in determining if you are going to upgrade? The current nature of the white LED market means that prices are still relatively high, especially compared to traditional lighting. Being an early adopter means paying a premium; are you comfortable with knowing you could have paid less for the same technology if you had waited?

3.) Is the light located in bright daytime sunlight or an area of high heat? High levels of heat will noticeably shorten the lifespan of any LED, especially white LEDs. When considering LEDs, try to ensure that both the fixture and the location allow for adequate passive cooling to avoid color-shift and longevity issues. This is a much bigger concern when considering retrofit bulbs versus considering a "total package" LED fixture and lamp.

4.) Are you needing to reduce the heat output from a traditional light source? In bathrooms, laundry rooms and small spaces, conventional lighting can produce uncomfortable heat. LED lighting is great for these areas because they produce no heat and because affordably illuminating smaller Led light housing areas with LEDs presents much less of a challenge.]]> geolide.com http://highpower.blog.shinobi.jp/geolide.com/if%20an%20led%20upgrade%20is%20the%20r Mon, 01 Feb 2021 02:33:13 GMT highpower.blog.shinobi.jp://entry/1